Copyright © 2019  Zhejiang Youwei Fastener Co., Ltd
浙ICP备17021751号 -1  www.300.cn

About Us   Products    News    Service     Contact us

YOUWEI FASTENERS

Focus on fasteners for more than 20 years, providing a one-stop solution

Zhejiang Youwei Fastener Co., Ltd

  • 4
  • 3
  • 2
  • 1
  • d
  • s
  • sd

Products center

Name

U.S. inch inch nut with teeth

Model
ASME / ANSI B18.16.4-2015
没有此类产品
Contact
Detail
yw
Hexagon flange nuts 
Model: ASME / ANSI B18.16.4-2015
Performance grade: Grade 6, Grade 8, grade 10,
Raw material: ml08 swrch35k 10B21
Hardness above grade 8: 26-36hrc surface treatment: to be determined
Mechanical properties as per GB / t3098.2
Nominal Size or
Basic Major Dia
of Thread
F B H J K Angularity
of Bearing
Surface
Width Across
Flats
Flange
Diameter
Nut
Thickness
Wrenching
Length
Flange
Thickness
Max Min Max Min Max Min Min Min Max
No.6 0.1380  0.312  0.302  0.422  0.406  0.171  0.156  0.10  0.02  0.014 
3.51  7.92  7.67  10.72  10.31  4.34  3.96  2.54  0.51  0.36 
8 0.1640  0.344  0.334  0.469  0.452  0.203  0.187  0.13  0.02  0.016 
4.17  8.74  8.48  11.91  11.48  5.16  4.75  3.30  0.51  0.41 
10 0.1900  0.375  0.365  0.500  0.480  0.219  0.203  0.13  0.03  0.017 
4.83  9.53  9.27  12.70  12.19  5.56  5.16  3.30  0.76  0.43 
12 0.2160  0.438  0.428  0.594  0.574  0.236  0.222  0.14  0.04  0.020 
5.49  11.13  10.87  15.09  14.58  5.99  5.64  3.56  1.02  0.51 
1/4 0.2500  0.438  0.428  0.594  0.574  0.236  0.222  0.14  0.04  0.020 
6.35  11.13  10.87  15.09  14.58  5.99  5.64  3.56  1.02  0.51 
5/16 0.3125  0.500  0.489  0.680  0.660  0.283  0.268  0.17  0.04  0.023 
7.94  12.70  12.42  17.27  16.76  7.19  6.81  4.32  1.02  0.58 
3/8 0.3750  0.562  0.551  0.750  0.728  0.347  0.330  0.23  0.04  0.025 
9.53  14.27  14.00  19.05  18.49  8.81  8.38  5.84  1.02  0.64 
7/16 0.4375  0.688  0.675  0.937  0.910  0.395  0.375  0.26  0.04  0.032 
11.11  17.48  17.15  23.80  23.11  10.03  9.53  6.60  1.02  0.81 
1/2 0.5000  0.750  0.736  1.031  1.000  0.458  0.437  0.31  0.05  0.035 
12.70  19.05  18.69  26.19  25.40  11.63  11.10  7.87  1.27  0.89 
9/16 0.5625  0.875  0.861  1.188  1.155  0.506  0.483  0.35  0.05  0.040 
14.29  22.23  21.87  30.18  29.34  12.85  12.27  8.89  1.27  1.02 
5/8 0.6250  0.938  0.922  1.281  1.248  0.569  0.545  0.40  0.05  0.044 
15.88  23.83  23.42  32.54  31.70  14.45  13.84  10.16  1.27  1.12 
3/4 0.7500  1.125  1.088  1.500  1.460  0.675  0.627  0.46  0.06  0.051 
19.05  28.58  27.64  38.10  37.08  17.15  15.93  11.68  1.52  1.30 
7/8 0.8750  1.312  1.269  1.750  - 0.790  0.757  0.51  0.12  -
22.23  33.32  32.23  44.45  20.07  19.23  12.95  3.05 
1 1.0000  1.502  1.450  2.060  - 0.896  0.870  0.55  0.16  -
25.40  38.15  36.83  52.32  22.76  22.10  13.97  4.06 
LARGE HEX FLANGE NUTS
Nominal Size or
Basic Major Dia
of Thread
F B H J K Angularity
of
Bearing
Surface
Width Across
Flats
Flange
Diameter
Nut
Thickness
Wrenching
Length
Flange
Thickness
Max Min Max Min Max Min Min Min Max
1/4 0.2500  0.438  0.428  0.728  0.700  0.312  0.281  0.15  0.04  0.024 
6.35  11.13  10.87  18.49  17.78  7.92  7.14  3.81  1.02  0.61 
5/16 0.3125  0.500  0.489  0.820  0.790  0.375  0.343  0.20  0.04  0.028 
7.94  12.70  12.42  20.83  20.07  9.53  8.71  5.08  1.02  0.71 
3/8 0.3750  0.562  0.551  0.915  0.885  0.406  0.390  0.24  0.04  0.031 
9.53  14.27  14.00  23.24  22.48  10.31  9.91  6.10  1.02  0.79 
7/16 0.4375  0.688  0.675  1.131  1.100  0.468  0.437  0.26  0.04  0.038 
11.11  17.48  17.15  28.73  27.94  11.89  11.10  6.60  1.02  0.97 
1/2 0.5000  0.750  0.736  1.205  1.175  0.515  0.485  0.29  0.06  0.041 
12.70  19.05  18.69  30.61  29.85  13.08  12.32  7.37  1.52  1.04 
9/16 0.5625  0.875  0.861  1.300  1.260  0.578  0.546  0.37  0.06  0.044 
14.29  22.23  21.87  33.02  32.00  14.68  13.87  9.40  1.52  1.12 
5/8 0.6250  0.938  0.922  1.360  1.280  0.640  0.600  0.42  0.06  0.045 
15.88  23.83  23.42  34.54  32.51  16.26  15.24  10.67  1.52  1.14 

yw

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待

Product List